Categories

OE-Look GT500 Intercooler Reservoir 3x Capacity Tank

OE-Look GT500 Intercooler Reservoir 3x Capacity Tank
Click to enlarge
Price: $99.00
Product ID : GT500ICTANK
Weight: 4.00 lbs
E-mail to a friend | Add To Wish List

Purchase

Description

OE-Look Intercooler tank for 07-12 Mustang Shelby GT500.

  • 3x capacity of the stock intercooler tank
  • Re-use your factory cap (great if you have purchased covers)
  • Requires slight trimming of upper intercooler pump hose due to larger size
  • Larger capacity tank increases the time it takes to heat soak
  • Allows for lower temps between 1/4 miles runs
  • Utilizes stock mounting point

INSTALLATION NOTES:

The tank inlet is at a different angle than the stock tank. When installing the larger capacity tank with an afco heat exchanger use 6 3/4" of the included 3/4" rubber hose to make the connection from the engine block to the side of the tank. Then use the rest of the hose to go from the outlet on the bottom of the tank to the inlet of the intercooler pump (in grill). Only one tank mounting point is needed. The factory hose going from the bottom fo the tank to the pump may also be used by rotating it 90* to prevent kinking.

Comment on Facebook

Product Reviews

Login or Register to write a review.
Reviewed by slothman
02/19/2014 - 02:10:47 PM
very nice fitment, easy install !
This tank is very nice. It is HUGE compared to the baby IC tank. It will help with cooling for sure.

The install is pretty simple. The lower hose on the right side of the tank is a little long, so you have to route it underneath the metal line that it sits on top of (in between). Then just slip it over the tank nipple, and you will have enough clearance so it does not kind.

The left side hose needs to be cut just a few inches (the one that goes to the engine) and it will not bend or kink.

Overall, this tank is a quality piece that fits perfect !