Categories

VMP Ultimate Pulley Removal & Installation Tool for GT500

VMP Ultimate Pulley Removal & Installation Tool for GT500
Click to enlarge
Price: $149.99
Product ID : VMPGT500TOOL
Weight: 10.00 lbs
E-mail to a friend | Add To Wish List

Purchase

Description

VMP Ultimate pulley puller and installer tool for Shelby GT500, comes in a hardsided foam-lined case.

Our tool utilizes fine thread bolts, bearings, and a supplied grease pack which makes using our tool a breeze. Less expensive tools that use course thread bolts and no bearing can make a pulley removal and installation 10 times harder, our tool avoids these headaches due to it's proper design.

Our puller is different from most on the market, it grabs the pulley by the ribs, and leaves no marks. Our tool includes a precision machined aluminum clamshell that clamps onto the pulley and grabs it by the ribs. This prevents damage and applies equal pulling force all the way around the pulley, for easy damage-free removal.

*For 2013 we updated our tool with a beefier clamshell and 1/2" bolts, a stronger bar, and seperate fine-thread bolts for installation and removal.

Parts List:                                         Qty:   Usage:

HD Clamshell Set

2

Clamps onto pulley

1/2”-13 bolts x 3”

2

Holds clamshell together

3/8”-16 bolts x 4”

2

Holds clamshell to square bar

3/8” washers

2

For use on long bolts in bar

Square bar

1

Used for pulley removal only

3/4”-16 bolt with nub

1

Used for removal ONLY

5/8”-18 bolt with tapped hole

1

Used for installation ONLY

M8 x 40 full thread screw

1

Used for installation of pulley

Large 5/8” D-3 bearing

1

Used for installation of pulley

Small washers

2

Used for removal of pulley

5/8”-18 nut

1

Used for installation of pulley

Grease Packet                      

1

For big bolt threads, nut, & washer

U-plate

Opt

For removing 03/04 Cobra Pulley

Also includes tool/bolt to press on your aftermarket pulley.

Will remove and install factory press-fit style pulley while supercharger is still installed on the car.

It also works with Lightnings, Roushcharged F150s, Roushcharged Mustangs (09+ M90 with press fit pulley or P51 TVS). Accommodates 2.6" to 3.15" pulleys, for larger pullies you will need the optional U-shaped plate designed for removing the stock 3.55" 03-04 Cobra pulley or others like it:




Instructions are included in the case behind the foam, or may be downloaded here.

Comment on Facebook

Product Reviews

Login or Register to write the first review.